| Product name | Mini Blue tooth Laser Engraving Machine |
| Laser power | | 5W |
| Engraving area | | |
| Engraving mode | X, Y axis drive, semiconductor LD diode light engraving |
| Software support voice | Chinese, English, Japanese |
| Image format | JPG ,BMP (24bit),TIFF ,PNG (32bit ),PCX(8bit and 24bit),PCD |
| Image accuracy | 508dpi (508dpi pictures can be carved 1:1 size, other resolution pictures will be automatically converted to 508dpi, But the picture size will not change) |
| Support operate system | |
| Laser is replaceable | |
| Working temperature | |
| LED indicator | Power indicator: red; Working equipment indicator light: blue; Connected device status indicator: green |
| Working life | Laser module life of more than 10,000 hours |
| Support engrave materials | 3W: Opaque and organic materials without added flame retardant substances, such as wood,cardboard, bamboo, leather carvings, and other materials. It is also possible to cover the surface of glass, ceramics, metal, and other objects with colored paper, leaving an image and the color of the paper after engraving. It can also cut softer sheet materials, such as paper, thin wood, EVA sheet, non-woven fabric, fabric, and other materials. | 5W: The surface of stainless steel and other metals with low reflectivity, as well as various metal oxidations,
electrophoreses, and electroplatings, can be engraved. Brass, aluminum, iron, and other metals with high light reflectivity cannot be engraved. Other combustible materials such as wood planks, plastic boards, leather, etc., can be engraved, and the power is adjustable |
| Materials cannot be engrave | 3W: Cannot be burned, such as: metal (without a paint layer), flame-retardant materials, transparent plastic, mirror items, and highly reflective items. | 5W:S uch as: gold, aluminum, copper and other metals with high reflectivity, as well as hard materials such as masonry and materials with high flame retardant properties. |
| Product material | Plastic + hardware + circuit board + electronic components |
| Certification | FCC / CE /FDA/TELEC /NCC/WEEE |
| Product size | 3W: Size: 185mm* 183mm* 171mm Packing size: 240* 240* 240mm | 5W: 185mm*183mm* 171mm Packing size: 235*235*240mm |
| Product weight | Net weight:0.9kg Gross weight: 1.4KG | Net weight:1kg Gross weight: 1.5KG |
| Warning | Do not use the laser light source of this product to illuminate anything other than the object to be carved, especially the human eye. · When carving plastic items and cutting plastic items, fans should be used to blow away the smoke to avoid the smoke attached to the transmission parts On, causing blockage and corrosion, but also to avoid inhalation of toxic gases. |
